Onkyo TX-NR585 Owners Manual - English - Page 125

Contents ≫ Connections ≫ Playback ≫ Setup ≫ General Specifications „„Amplifier Section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Maximum Effective Output Power 170 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD Dynamic Power (*) * IEC60268-Short-term maximum output power 160 W (3 Ω, Front) 125 W (4 Ω, Front) 85 W (8 Ω, Front) THD+N (Total Harmonic Distortion+Noise) 0.08% (20 Hz - 20,000 Hz, half power) Input Sensitivity and Impedance 200 mV/47 kΩ (LINE (RCA)) 3.5 mV/47 kΩ (PHONO MM) Rated RCA Output Level and Impedance 1 V/470 Ω (SUBWOOFER PRE OUT) 200 mV/2.3 kΩ (ZONE LINE OUT) Phono Maximum Input Signal Voltage 70 mV (MM 1 kHz 0.5%) Frequency Response 10 Hz - 100 kHz/+1 dB, -3 dB (Direct) Tone Control Characteristics ±10 dB, 20 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT) 80 dB (IHF-A, PHONO IN, SP OUT) Speaker Impedance 4 Ω - 16 Ω Headphone Rated Output 80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) Supported impedance of Headphones 8 Ω - 600 Ω Headphones Frequency Response 10 Hz - 100 kHz „„Video Section Signal level 1 Vp-p/75 Ω (Composite Video) 1 Vp-p/75 Ω (Component Video Y) 0.7 Vp-p/75 Ω (Component Video B/R) Maximum resolution supported by component video 480i/576i „„Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz 50dB quieting sensitivity (FM) 1.56 μV, 15.0 dBf (IHF, 1kHz, 100% MOD) AM Tuning Frequency Range 530 kHz - 1710 kHz Preset Channel 40 „„Network Section Ethernet LAN 10BASE-T/100BASE-TX Wireless LAN IEEE 802.11 a/b/g/n standard (Wi-Fi® standard) 5 GHz/2.4 GHz band 125 Front Panel≫ Rear Panel≫ Remote≫