Onkyo TX-NR585 Owners Manual - English - Page 89
Level Calibration, Dolby Enabled Speaker
View all Onkyo TX-NR585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m. 4. Level Calibration Adjust the volume level of each speaker. Setting Item Front Left Center Front Right Height Left Height Right Surround Right Surr Back Right Default Value 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB Setting Details Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Setting Item Surr Back Left Surround Left Subwoofer Default Value 0 dB 0 dB 0 dB Setting Details Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-15 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. 5. Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. Setting Item Default Value Dolby Enabled 6.0 ft/1.80 m Speaker to Ceiling AccuReflex Off Setting Details Set the distance between the Dolby Enabled Speaker and the ceiling. Select between "0.1 ft/0.03 m" and "15.0 ft/4.50 m" (0.1 ft/0.03 m units). • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling. "Off": When this function is not used "On": When this function is used • This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker". 89 Front Panel≫ Rear Panel≫ Remote≫