Onkyo TX-SR383 Owners Manual - English - Page 26

Contents ≫ Preparation ≫ Playback ≫ Setup ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. To play 4K or 1080p video, use a high speed HDMI cable. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the "Control" function(*) that enables linking with input selectors, etc. and the "Standby Through" function that can transmit video and audio signals of the AV component to the TV even if this unit is in standby mode. Also, the POWER OUT jack on the rear panel can supply power (5 V/1 A) to a streaming media player, etc. using a USB cable. To supply power even when this unit is in standby mode, change the setting value of "POWER OUT Standby" ( p65) to "ON". a BD/DVD a HDMI cable Cable/Satellite set-top box GAME Streaming media player Setup • Settings are required to use the "Control" function and "Standby Through" function. After all the connections are completed, check the setting method on Menu operations ( p60), and refer to "Control" ( p64) and "Standby Through" ( p65) respectively to make the settings. • To enjoy digital surround sound including Dolby Digital, set the audio output of the connected Blu-ray Disc player etc. to the Bitstream output. (*)"Control" function: This function enables various linking operations with CECcompliant devices, such as switching input selectors interlocking with a CECcompliant player, switching audio output between TV and this unit or adjusting the volume using the remote controller of a CEC-compliant TV, and automatically switching this unit to standby when the TV is turned off. 26 Front Panel≫ Rear Panel≫ Remote≫