Onkyo TX-SR383 Owners Manual - English - Page 68
Troubleshooting, Before starting the procedure - reset
View all Onkyo TX-SR383 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Contents ≫ Preparation ≫ Playback ≫ Setup ≫ Troubleshooting BLUETOOTH function 74 USB storage device 74 Before starting the procedure Multi-zone function 75 Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, Remote Controller 75 setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the Display 75 HDMI linked operation does not work, disconnecting/connecting the HDMI cable Others 75 may solve it. When reconnecting, be careful not to wind the HDMI cable since if wound the HDMI cable may not fit well. After reconnecting, turn off and on the unit and the connected device. • The AV receiver contains a microPC for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least 2 munites, and then plug it back in. • Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly. When the unit is operating erratically 69 Resetting the unit (this resets the unit settings to the default) 69 Troubleshooting 70 Power 70 Audio 70 Listening Modes 72 Video 72 Linked operation 73 Tuner 73 68 Front Panel≫ Rear Panel≫ Remote≫