Optoma BTR100 BTR100 M en US - Page 7
Reconnecting your device, Adding a new phone or tablet, Out of range or lost signal
View all Optoma BTR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Reconnecting your device If you moved out of range or turn off the Bluetooth feature on you mobile devices, BTR-100 will automatically disconnect from your device. To reconnect, simply go through the pairing process on your mobile device, the connection will then be re-established. Adding a new phone or tablet: To establish a new connection with BTR-100 using another mobile device, please follow the steps below. 1. Terminate the existing Bluetooth connection with connected device. 2. Make sure the BLUE LED is flashing indicating that BTR-100 is ready for pairing 3. Follow the instruction on "Pairing the BTR-100" to connect a new device. Out of range or lost signal: When the paired device is away from receiver (10 meters) or the Bluetooth signal is blocked. The LED light will turn off, meaning that the connection between the device and BTR-100 is lost. To avoid a lost of connection: 1. Move the playback device back into range (within 10 meters), and make sure there's a clear line of sight with no obstruction between BTR-100 and device. 2. Within 15 seconds, the connection will automatically be re-established and LED light will stop flashing. 3. If the connection is lost for more than 15 seconds, you will need to reconnect the device with BTR-100 again. Please follow instructions on "Reconnecting Your Device". 6