Optoma BTR100 BTR100 M en US - Page 8

LED Indication Flashing LED light Steadily Lighted Indication of LED Status Power on ready for pairing Connected Description Waiting for connection Connection established Troubleshooting Please go through the troubleshooting steps below if there is no sound coming out of your speakers/devices. ◎ Make sure the BTR-100 is turned on. ◎ Make sure an audio cable or an optical cable is correctly and firmly connected to your BTR-100 and your audio device/home stereo system. ◎ Make sure that the audio source is correctly selected on your amplifier (analog audio or TOSLINK) ◎ Make sure the volume is set at a comfortable listening level ◎ Make sure you are within the effective range of reception. ◎ Make sure the Bluetooth is turned on your source device. ◎ Make sure the music is playing from the mobile device. SAFETY WARNINGS ◎ Keep BTR-100 away from water. ◎ Clean with dry cloth. ◎ Unplug the BTR-100 before cleaning. ◎ Place BTR-100 away from heat sources. ◎ Use only the included accessories. ◎ Unplug the BTR-100 when it is not used.. ***aptX® software is copyrighted by CSR plc or its group companies. All rights reserved. The aptX® mark and the aptX logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. 7