Optoma HD72 User Manual - Page 36
Intermission Problems
UPC - 796435115890
View all Optoma HD72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Appendices Image is out of focus Make sure the Lens cap is removed. Adjusts the Focus Ring on the projector lens. Make sure the projection screen is between the required distance 4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 17. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format on projector side. If you play the LBX format DVD title, please change the format as LBX in projector OSD. If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio by referring to the following: Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player. Image is too small or too large Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Press [4:3], [16:9], [Letter Box], [Native] button on the remote control or [Projector menu] on the projector panel, go to "Display-->Format". Try the different settings. Use of Keystone is not recommended. Image has slanted sides: If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. Press [Keystone +/-] button until the sides are vertical on the remote control. Image is reversed Select "Setup-->Projection" from the OSD and adjust the projection direction. Intermission Problems The projector stops responding to all controls 36