Optoma HD83 User's Manual - Page 56
Ceiling Mount Installation - buy
View all Optoma HD83 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Appendices NOTE Please note that damage resulting from incorrect installation will invalidate the warranty. Ceiling Mount Installation . To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projector met the following specifications: Screw type: M6 Maximum screw length: 2mm Minimum screw length: 0mm Warning: . If you buy a ceiling mount from another company, please be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting plate. 2. Be sure to keep at least 0cm gap between the ceiling and the bottom of the projector. 3. Avoid installing the projector near a heat source. 370.90mm (14.60") 75.34mm (2.97") 220.00mm (8.66") 20.00mm (0.79") 260.00mm (10.23") 138.50mm (5.45") 498.57mm (19.63") 188.10mm (7.40") 120.00mm (4.72") 120.00mm (4.72") 10.99mm (0.43") 81.19mm (3.20") 97.99mm (3.86") English 56