Optoma ML1000P User's Manual - Page 5

Connect input source - Composite AV in Insert SD Card 1 2 or 1 For video and audio input 2 or 1. C onnect the AV input source. (~) 2. After powering on the projector, press direct source button on the LOCK remote or swipe left or right on the touch panel. Insert an SD card into the slot with the gold contacts facing down. 1. All other brand and product names are trademarks or registered trademarks of their respective companies. 2. The cables connecting the video output devices are not supplied, please contact the device vendor or Optoma. 3. iPod nano/iPod touch/iPhone/iPod classic (version 5 and above) 4. Designed for iPod/iPhone/Mobile phone/ PMP with TV out functions. Using with devices with audio signal voltage > 0.3Vrms is not recommended. •• To remove the SD card, push the card to eject it from the slot. •• Do not remove the SD card while the projector is projecting image from the card. This can cause data loss or damage the card. •• Supports SD card size up to 32GB. •• The SD card is not included in the package. Insert USB Flash Drive Plug a USB flash drive into the USB Type A port at the back of projector. 1 Support USB flash drive with FAT32 format. 2 TM Connect Computer for User Manual Mount the Projector 1 Connect a laptop or PC using the Micro USB to USB Type-A cable. 2. Turn on the projector. 3. CD-ROM icon will appear on the laptop/PC screen. 1 4. Click CD-ROM icon and open User Manual. Screw hole for tripod 2 Screw a standard tripod into the screw hole on the projector. *Standard Tripod *Ceiling Mount Screw holes (M3x10) for ceiling mount 1. Place the projector upside down on a flat surface. 2. Line up the three mounting holes and use the three ceiling mount screws to secure the mount to the projector. The tripod and ceiling mount are optional accessories. 5