Optoma W401 User's Manual - Page 50
How to use web browser to control your projector, can be found in the [tools] tab. see
View all Optoma W401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
User Controls How to use web browser to control your projector 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. Network Status Connected MAC Address DHCP Off IP Address Subnet Mask Gateway DNS Exit 2. Then choose apply and press " " button to complete the configuration process. 3. Open your web browser and type in the projector's IP address from the OSD LAN screen. The following web page will display as below: 4. If connecting the projector to external Crestron control hardware, the settings can be found in the [tools] tab. (see picture). Please note, each field can only contain a limited number of characters, as shown in the table below. (spaces and the other punctuation included): Category Item Crestron Control Projector Network Configuration User Password Admin Password IP Address IP ID Port Projector Name Location Assigned To DHCP (Enabled) IP Address Subnet Mask Default Gateway DNS Server Enabled New Password Confirm Enabled New Password Confirm Input-Length (characters) 15 2 5 10 9 9 (N/A) 15 15 15 15 (N/A) 15 15 (N/A) 15 15 English 50