Optoma W402 Manual - Page 66
Lamp Replacement Procedure, Lamp Reset: i Press Menu
View all Optoma W402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Appendices 2 The screw on the lamp cover and the lamp cannot be removed. The projector cannot be turned on if the lamp cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it was accidentally touched. 6 1 5 3 4 7 Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or on the Keypad of the projector. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the one screw on the cover. 1 5. Push up and remove the cover. 2 6. Lift up the lamp handle. 3 7. Press on the both sides then lift up and remove the lamp cord. 4 8. Unscrew the one screw on the lamp module. 5 9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully. 7 To replace the lamp module, reverse the previous steps. 10. Turn on the projector and reset the lamp timer. Lamp Reset: (i) Press "Menu" (ii) Select "OPTIONS" (iii) Select "Lamp Settings" (iv) Select "Lamp Reset" (v) Select "Yes". English 66