Optoma WHD200 User Manual - Page 3

1. Important Information Please take the time to read this user manual  before using the WHD200T and WHD200R. It contains important information about operating your Full HD video wireless kit.  Our limited warranty applies when the product is handled properly for intended use, in accordance with its operating instruction.  However, the warranty may be void in the following cases:  Repair, product modification or alteration have been performed by unauthorized  service personnel  Damages caused by accidents, including but not limited to, lightning, water, fire, or moisture  Use of an AC adapter not compatible with the product and its voltage rating  The model number on the product has  been altered, deleted, removed or made illegible.  Safety Precautions WARNING! RISK OF  ELECTRICAL SHOCK  DO NOT OPEN WARMING: TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE THE COVER NO USER-SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED PERSONNEL Danger: Be careful with electricity.   Power to the units must be switched off before any work is undertaken, such as any AV device connection or TV connection.    Power outlet: To prevent electric shock, make sure to use the appropriate AC adapters as power supply to the transmitter and the receiver. Power cord: Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items. Power overloading: Avoid overloading electrical outlets or extension cords which otherwise could result in electric shock or fire. Lightning: Disconnect the product from the power source if it is left unattended for a long period of time, and to protect the product from lightning. Always disconnect the power cord from the power outlet when you are not using your Full HD Video wireless kit. This reduces the risk of electric shocks or fire. Warning This product should not be exposed to dripping or splashing. No object filled with liquids, such as vases, should be placed on the product. Object Entry: To avoid electric shock, never stick anything in the slots on the case or remove the cover. Place receiver/transmitter on a flat, hard and stable surface Ventilation: Do not block the ventilation slots on the receiver/transmitter or place any heavy object on the top cover. Blocking the air flow could damage the receiver. Arrange components so that air can flow freely around the receiver. Ensure that there is adequate ventilation if the receiver is placed in a stand. Put the receiver/transmitter in a property ventilated area, away from direct sunlight or any source of heat. Water Exposure: To reduce the risk of fire or electric shock, do not expose the receiver/transmitter to rain or moisture. This is indoor solution. Our company has the right to modify this document without any notice. 2