Optoma ZK1050 ZK1050_UM - Page 38
Remote Settings, 12V Trigger, Projector ID, Light Sensor, Keypad LED Settings, Options, IR Function
![]() |
View all Optoma ZK1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
USING THE PROJECTOR Remote Settings Configure the settings of the Infra-Red (IR) remote control. IR Function Set the remote receiver for the projector to control the communication between the projector and the IR remote. Front: Enable or disable the front remote receiver. Top: Enable or disable the top remote receiver. HDBaseT: Select On to set the HDBaseT terminal as the remote receiver. Remote Code Assign an ID code from 00 to 99 for the remote receivers on the projector. The projector only responds to the IR remote control set with the same ID code. For more details on setting an ID code for the IR remote control, see Remote control ID setup on page 20. Hot Key Settings Assign a function to the Hot Key button on the remote control. It allows you to use the function easily without going through the OSD menus. The available functions for the Hot Key button are Aspect Ratio and Freeze Screen. 12V Trigger When set to On, the projector screen is automatically raised or lowered when the projector is turned on or off. This function only works when the projector is connected to an electrical projector screen. Projector ID Assign an ID code for the projector from 00 to 99. Use this code as the projector ID when controlling the projector by RS232, HDBaseT, or other devices. For more information, see Control from the network menu on page 40. Light Sensor Light brightness decays naturally over time, although the decay is very gradual for laser projectors. Light sensor calibration helps maintain the correct color point and correct the color shift of the projected image. Default: Always perform the light sensor calibration at the cooling stage. Manual: Manually carry out the light sensor calibration. Keypad LED Settings Enable or disable the projector's keypad LED light. Options Adjust the basic projector settings. Language Select a language for the OSD menu. The available languages are English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Swedish, Norwegian/Danish, Finnish, Greek, Traditional Chinese, Simplified Chinese, Japanese, Korean, Russian, Hungarian, Czechoslovak, Arabic, Thai, Turkish, Persian, Vietnam, Indonesian, Romanian, and Slovakian. Menu Settings Adjust the settings of the OSD menu. Menu location: Select the menu location from Top left, Top right, Center, Bottom left, and Bottom right. Menu Transparency: Set the menu transparency level. Menu Timer: Set the length of time the menu displays on the screen. 38 English
![](/manual_guide/products/optoma-zk1050-zk1050um-f0c8e6f/38.png)