Optoma ZK1050 ZK1050_UM - Page 42
Overview of the web control panel, Submenu, Description, Accessing the web control panel
View all Optoma ZK1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
USING THE PROJECTOR Overview of the web control panel Configure the projector settings using web browser. Menu Settings Menu HOME Network MENU Submenu Information Main Date & Time Schedule Upgrade LAN WiFi Picture Setup Description View the projector information and firmware version details. Select the projector input sources. Direct keys to enable or disable the projector power, shutter, and OSD. Set up the projector date and time. Create schedules for the projector to turn on or off automatically. Upgrade the projector firmware. Set up the wired network and Crestron Control System (CCS) connection. Set up the wireless network. Adjust the basic image settings, such as image size and position. Adjust the projector general settings, lens settings, and power settings. Accessing the web control panel When network is available, connect the projector and the computer to the same network. Use the projector address as the web URL to open the web control panel in a browser. 1. Check the projector address using the OSD menu. In a wired network, select Network > LAN > IP Address. Note: Make sure DHCP is enabled. In a wireless network, select Network > WLAN > Gateway. 2. Open a web browser and type the projector address in the address bar. 3. The web page redirects to the web control panel. When network is not available, see Directly connect the projector to a computer on page 43. 42 English