Oreck Heatwise Infrared Owners Guide - Page 12

Troubleshooting Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck authorized service center. Problem The heater's airflow has been reduced Solution • Make sure the electrostatic filter is clean. • Check front grill and look behind rear air intake for any objects that could obstruct air-flow. • If the heater's airflow is still diminished or has stopped, please contact Customer Service. The heater stays ON after I push the Power Button to turn it off • This is a normal function of the heater. DO NOT unplug the heater until you no longer hear the fan running. During this time, the heater is cooling down. The heater's display is showing a line of dots Heater thermostat temperature does not match wall thermostat temperature The heater will not turn on. • This is part of the heater's normal operation. After a period of inactivity, the heater will enter into a "screen saver" mode to conserve opwer. This will not affect the heater's operation. When any function key is pressed, the heater's display will reappear. • Contact Customer Service to obtain programming instructions for matching your Heatwise thermostat settings with your existing wall thermostat. • Test the outlet to make sure there is power available and then check the heater display for the flashing Time Delay Light. Press the Power Button to turn off the timer and resume normal operation of the heater. Until still does not operate properly. • Contact Oreck for service.