Oreck Heatwise Infrared Owners Guide - Page 5
Save These, Instructions
View all Oreck Heatwise Infrared manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
• Heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handle when moving this heater. • DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. • To disconnect heater, turn controls to OFF then remove plug from outlet. • Connect to properly grounded outlets only. • To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, where openings may become blocked. • Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock or injury to persons. • Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. • This heater is for use on 120 volts. The adapter should not be used if a three-slot grounded receptacle is available. • Heater must not be located immediately below a socketoutlet. • DO NOT use this heater in or around a bath, a shower or a swimming pool. SAVE THESE INSTRUCTIONS