Oreck Orbiter Owners Guide - Page 15

Left safety lock button Thermostat indicator light Power light Red indicator Filler cap ON/OFF button Turn the Steamer ON ! WARNING! Steam may cause serious injury if in contact with body parts. Ensure the filler cap is seated properly and tight, and the safety lock button on the hose handle is engaged before turning the steamer ON. Always direct the trigger away from the user and away from any bystanders. Important! The red indicator on the filler cap is a safety device. It will push out when there is steam pressure in the boiler and go back in when it is safe to refill the boiler tank. Do not attempt to remove the cap when the indicator is pushed out. Turning the unit off and depressing the trigger will assist in reducing pressure in the system. 1. Insert the power plug into a polarized electrical outlet. 2. Check the filler cap is seated properly and tight. 3. Engage the trigger lock by pushing the safety lock button on the left side of the hose handle. 4. Press down on the ON/OFF button. The power and thermostat indicator will illuminate. Important! Turning the unit off and depressing the trigger will assist in reducing pressure in the system. It takes approximately five minutes to reach the correct temperature. The thermostat indicator light turns off when the correct temperature has been reached. Tip! Filling the unit with hot water will reduce the preheat time. 15