Oregon Scientific WMR90A User Manual - Page 6

EN 2. Press and hold ALARM to enter the alarm setting. 3. Press + or - to set the desired values. 4. Press ALARM to confirm the setting. To activate / deactivate the high / low temperature, heat index, wind chill, humidity and dew point alarms: 1. In the Temperature or Humidity Area, press ALARM repeatedly to select the desired alarm. 2. Press M I N / M A X to activate or deactivate the alarm. NOTE The dew point advises at what temperature condensation will form. The wind chill factor is based on the combined effects of temperature and wind speed. TEMPERATURE AND HUMIDITY TREND The trend lines are shown next to the temperature and humidity readings. The trend is shown as follows: TREND ICON DESCRIPTION Rising Steady Falling To clear the memories and timestamp for the wind readings: In the Wind Speed and Wind Direction Area, press and hold MIN/MAX to clear the readings. To change the high gust wind speed alarm: 1. In the Wind Speed and Wind Direction Area, press and hold ALARM to enter the high gust wind alarm setting. 2. Press + or - to set the desired values. 3. Press ALARM to confirm the settings. To activate / deactivate the high gust wind speed alarm: 1. In the Wind Speed and Wind Direction Area, press ALARM repeatedly to select the desired alarm. 2. Press MIN / MAX to activate or deactivate the alarm. UVI / BAROMETER / RAINFALL The weather station works with one UV sensor and one rain gauge. The station is capable of storing and displaying the hourly history data for the last 10 hours of UV index, and 24 hours of rainfall and barometric pressure readings. UVI BAROMETER RAINFALL COMFORT LEVEL The Comfort Zone icon indicates how comfortable the climate is based on current temperature and humidity measurements: TREND ICON DESCRIPTION Comfortable Neutral Uncomfortable WIND DIRECTION / SPEED The base station provides wind speed and wind direction information. To read the wind direction find the compass point the is pointing to. The timestamp records the date and time when storing the wind speed readings. To select the wind speed unit: Press UNIT (at the back of the base station) to switch between: • Metres per second (m / s) • Kilometers per hour (kph) • Miles per hour (mph) • Knots (knots) The wind level is shown by a series of icons: ICON LEVEL DESCRIPTION N/A 88 km/h) To display the AVERAGE and GUST wind: 1. Press SELECT to navigate to the Wind Speed and Wind Direction Area. will show next to the Area. 2. Press MODE to toggle between AVERAGE and GUST wind readings. To display the maximum speed and direction for gust wind: In the Wind Speed and Wind Direction Area, press MIN/MAX to toggle between wind speed / MAX GUST wind readings. The timestamp is displayed accordingly in the Clock Area. The bar chart display shows the current and historical data for the UV index, barometric pressure and rainfall readings. To view the UV / Barometer / Rainfall readings: 1. Press SELECT to navigate to the UV / Barometer / Rainfall Area. next to the Area. will show 2. Press MODE to toggle between UVI / Barometer / Rainfall readings. The corresponding icon will appear: UVI BAROMETER RAINFALL 3. Press + or - to view the historical data selected area. The corresponding historical readings are showing. NOTE The number shown in the HR icon indicates how long ago each measurement was taken (e.g. 2 hours ago, 3 hours ago, etc.). To select the measurement unit for the barometer or rainfall readings: In the UV / Barometer / Rainfall Area, press UNIT (at the back of the base station) to switch between: • Barometer: Millimeters of mercury (mmHg), inches of mercury (inHg), millibars per hectopascal (mb / hpa). • Rainfall: Millimeters (mm), inches (in), inches per hour (in / hr) or millimeters per hour (mm / hr). UV INDEX The UV index levels are as follows: UV INDEX 0-2 3-5 6-7 8-10 11 and above DANGER LEVEL Low Moderate High Very high Extremely high ICON To change the high UV alarm: 1. In the UV / Barometer / Rainfall Area and UVI reading display, press and hold ALARM to enter the high UV alarm setting. 2. Press + or - to set the desired values. 3. Press ALARM to confirm the settings. To activate / deactivate the high UV alarm: 1. In the UV / Barometer / Rainfall Area and UVI reading display, press ALARM repeatedly to select the desired alarm. 2. Press MIN/MAX to activate or deactivate the alarm. 6