Oregon Scientific WMR90A User Manual - Page 7

EN BAROMETER To change the barometer alarm: 1. In the UV / Barometer / Rainfall Area and Barometer reading display, press and hold ALARM to enter the Barometer alarm setting. 2. Press + or - to set the desired values. 3. Press ALARM to confirm the settings. To activate / deactivate the barometer alarm: 1. In the UV / Barometer / Rainfall Area and Barometer reading display, press ALARM repeatedly to select the desired alarm. 2. Press MIN/MAX to activate or deactivate the alarm. To set the altitude level compensation for the Barometer readings: 1. In the UV / Barometer / Rainfall Area and Barometer reading display, press and hold MODE to enter the altitude setting. 2. Press + or - to set the desired values. 3. Press MODE to confirm the setting. TROUBLESHOOTING PROBLEM Barometer Calendar Clock Temp Remote sensor SYMPTOM Strange readings Strange date / month Cannot adjust clock Cannot auto-synch Shows "LLL" or "HHH" Cannot locate remote sensor REMEDY Set unit Change language Disable radio-controlled clock 1. Adjust batteries 2. Press RESET 3. Manually activate radio controlled clock Temperature is out-of-range 1. Check batteries 2. Check if sensors are within range RAINFALL To view the current hour, accumulated or last 24 hours rainfall history: In the UV / Barometer / Rainfall Area and Rainfall reading display, press MIN/MAX repeatedly to toggle between current, past 24 hours or accumulated rainfall. The clock line will change to display the start time when the accumulated rainfall is displayed. The icon appears and the start date is showing. To toggle between rainfall & rain rate display: In the UV / Barometer / Rainfall Area and Rainfall reading display, press and hold MODE. To reset the accumulated rainfall and timestamp: In the UV / Barometer / Rainfall Area and Rainfall reading display, press and hold MIN/MAX to reset the accumulated rainfall to '0' and to set the timestamp to current date and time. To change the HI rainfall rate alarm: 1. In the UV / Barometer / Rainfall Area and Rainfall reading display, press and hold ALARM to enter the Rainfall alarm setting. 2. Press + or - to set the desired values. 3. Press ALARM to confirm the settings. To activate / deactivate the HI rainfall rate alarm: 1. In the UV / Barometer / Rainfall Area and Rainfall reading display, press ALARM repeatedly to select the desired alarm. 2. Press MIN/MAX to activate or deactivate the alarm. WEATHER ALARMS Weather alarms are used to alert you of certain weather conditions. Once activated, the alarm will go off when a certain criterion is met. Alarms can be set for: • Indoor and outdoor high/low temperatures, dew point and high/low humidity • High Heat Index • High Gust Wind • Low wind chill • High UV • Pressure drop • High rain rate See the relevant section for how to set the alarm. To silence any alarm: Press any button. PRECAUTIONS • Do not subject the unit to excessive force, shock, dust, temperature or humidity. • Do not cover the ventilation hole with any items such as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not clean the unit with abrasive or corrosive materials. • Do not tamper with the unit's internal components. This invalidates the warranty. • Only use fresh batteries. Do not mix new and old batteries. • Images shown in this manual may differ from the actual display. • When disposing of this product, ensure it is collected separately for special treatment. • Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information. • The contents of this manual may not be reproduced without the permission of the manufacturer. • Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. • Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use. NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. SPECIFICATIONS BASE STATION Dimensions (L x W x H) Weight INDOOR BAROMETER Barometer unit Measuring range Accuracy Resolution Altitude setting Weather display Memory 140 x 16 x 177 mm (5.5 x 0.6 x 6.9 in) 250g (8.82 oz) without battery mb/hPa, inHg and mmHg 700 - 1050mb/hPa +/- 10 mb/hPa 1mb (0.0 inHg) Sea level User setting for compensation Sunny, Partly Cloudy, Cloudy, Rainy and Snowy Historical data and bar chart for last 24hrs RESET Press RESET to return to the default settings. ACCESSORIES - SENSORS This product can work with up to 10 sensors at any one time to capture outdoor temperature, relative humidity or UV readings in various locations. Optional wireless remote sensors such as those listed below can be purchased separately. For more information, please contact your local retailer. • Thermo-hygro THGR800 (3-Ch) • Thermo-hygro THGR810 (10-Ch) • UV UVN800 INDOOR TEMPERATURE Temp. unit Displayed range Operating range Accuracy Comfort Memory Alarm °C / °F 0°C to 50°C (32°F to 122°F) -30°C to 60°C (-4°F to 140°F) 0°C - 40°C: +/- 1°C (+/- 2.0°F) 40°C - 50°C: +/- 2°C (+/- 4.0°F) 20°C to 25°C (68°F to 77°F) Current, min and max temp. Dew Point w/ min and max Hi / Lo INDOOR RELATIVE HUMIDITY Displayed range Operating range Resolution Accuracy Comfort 2% to 98% 25% to 90% 1% 25% - 40%: +/- 7% 40% - 80%: +/- 5% 80% - 90%: +/- 7% 40% to 70% 7