Palm Zire 71 Handbook - Page 255
Beaming problems, Recharging problems
UPC - 805931008350
View all Palm Zire 71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
Beaming problems Beaming problems Problem Solution I cannot beam data to another device with an IR port. Try each of these in turn: s If you are beaming to another Palm handheld, confirm that your handheld and the other handheld are between ten centimeters (approximately 4") and one meter (approximately 39") apart and that the path between the two handhelds is clear of obstacles. Beaming distance to other devices with an IR port may be different. s Move your handheld closer to the receiving device. s Make sure the receiving device has enabled beam receive. When someone beams data to my handheld, I get a message telling me it is out of memory. Try each of these in turn: s Your handheld requires at least twice the amount of memory available as the data you are receiving. For example, if you are receiving a 30KB application, you must have at least 60KB free. s Perform a soft reset. See "Performing a soft reset" in Appendix A for more information. Recharging problems Problem Solution When I connect my handheld to the cradle/cable, it does not charge. Try each of these in turn: s Confirm that your handheld is firmly connected to the cradle/cable. s Confirm that your recharger cable is properly connected to the cradle/cable. On some cradles/cables the recharger cable connects to the back of the USB or serial port connector that plugs into your computer, and on other cradles/cables the recharger cable connects to the back of the cradle/cable. s Confirm that your recharger is plugged into an AC outlet that has power. s With your handheld seated in the cradle/cable. Press the power button and tap the Home icon . Confirm that there is a lightening bolt on the battery icon at the top of the screen. s Charge your handheld for at least two full hours. 245