Palsonic DVD2000 Owners Manual - Page 18

Storing markers in memory to be viewed (listened) again Storing a marker in the memory 1 Press MARKER during play. " l " indicates no marker has been stored yet. 2 Press SELECT during play at the starting point to be viewed (listened) again. Indicates "MARKER 1" is stored in the memory. (If SELECT is pressed where any number is already displayed, the previous starting point will be replaced by the new one.) Up to 5 markers can be stored in the memory. l Press MARKER to clear the display. Recalling/clearing a marker 1 Press MARKER during play 2 Tilt the joystick to the direction to select the marker to be recalled/cleared. 3 Tilt the joystick to the A direction to recall a marker. or Press CLEAR to clear a marker. Play resumes from the point corresponding to the selected marker. (The display will be cleared automatically.) or The selected maker is cleared. (Press MARKER to clear the display.) Notes: l These operations work only with discs for which the elapsed playing time appears on the unit's display during playback. l Some subtitles recorded around the marker may fail to appear. [DVD] For your reference: l Al1 the markers are cleared when the power is turned off or the disc is removed. Changing subtitle language [DVD only] The subtitle language of your player has been factory pre-set to English (This operation works only with discs on which multiple subtitle languages are redorded.) 1 Press SUBTITLE during play. l When no subtitles are recorded "--" will be displayed instead of the language number. 2 Tilt the joystick to the direction until the preferred language is selected. Pressing the numeric button(s) also changes the subtitle language. l Press SUBTITLE or SELECT to clear the display. To clear/display the subtitles Tilt the joystick to the direction to select ON or OFF at the step 2. Note: l In some cases, the subtitle language is not changed immediately to the select one. For your reference: l When the preferred language is not selected even after tilting the joystick several times, it means that the language is not available on the disc. l When the power is turned on or the disc is removed, subtitles appear in the language selected at the initial settings. If this language is not recorded on the disc, they appear in the disc's priority language. 18