Palsonic DVD2000 Owners Manual - Page 22

Initial settings Selecting TV screen Type Select the appropriate screen type according to your TV set; conventional size screen (4:3) or wide-screen (16:9) 1 At the initial settings screen Select "6 TV Aspect" by the joystick and press SELECT. Initial settings Selecting digital input Select the digital output to be output from the optical/ coaxial digital audio output connector of the unit 1 At the initial settings screen Select "7 digital Audio Output" by the joystick and press SELECT. 2 Select the preferred item (1 or 2) by the joystick and press SELECT. 4:3 Select when a conventional TV set is connected. (factory setting) The video material formatted in the Pan & Scan style is played back in the style (the left and right edges are cut off). The video material not formatted in the Pan & Scan style is played back in the letterbox style (black bands appear at top and bottom of screen). 16 : 9 Select when a wide-screen TV set is connected. Play in "FULL" size. (Setting the wide-screen TV to "FULL" mode is also necessary.) *Each screen shows an example when the video material for a wide-screen is played. (This setting does not affect the video material for conventional size.) Setting is finished and initial settings screen is displayed. Also refer to "Common procedures of initial settings" page 20. 2 Select the preferred item (l-3) by the joystick and press SELECT. When "1" LPCM(DVD) is selected Off: Only linear PCM of 48kHz/16 bit is output from the digital audio output connector. During playback of the DVD recorded in the linear PCM of 48kHz/20 bit/24 bit or 96 kHz no digital audio is output. (Factory setting) PCM: During playback of the DVD recorded in the linear PCM of 48kHz/20 bit/24 bit or 96kHz digital audio converted to 48kHz/16 bit is output (Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection.) When "2" Dolby Digital is selected Bitstream:Dolby Digital (AC-3) bitstream (2ch-5.1ch) is output. (Factory setting) PCM: PCM (2ch) of 48khz/16 bit is output. 3 Select the preferred value by the joystick at each screen and press SELECT. The screen at the step 1 is displayed. Select "0" by the joystick and press SELECT to return to the initial settings screen. For your reference: l Make settings as shown in the following table depending on the kind of amplifier that is connected to the optical/coaxial digital audio output connector. Type of amplifier to be Recommendable setting connected LPCM (DVD) Dolby Digital No amplifier is connected Off Bitstream AV amplifier including Dolby Digital decoder PCM* Bitstream *Audio output from the unit's audio output connectors is converted to 48 kHz/16 bit in addition to audio to audio from the audio output connector. To enjoy high quality sound at 48 kHz/20 bit/24 bit or 96 kHz, connect the amplifier or decoder directly to the audio output connectors, not to the digital audio output connector. [Select "off' at the "1 PCM (DVD)"] Also refer to "Common procedures of initial settings" page 20. 22