Palsonic TFTV421080HD Owners Manual - Page 33

Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Possible Solutions Remote control does not operate ! The batteries could be weak. Replace the batteries. ! Check the orientation of the batteries. ! Make sure the power cord is plugged in. Video and Audio Problem No picture (screen not lit), No sound Dark, poor or no picture (Screen lit), good sound No color/dark picture/color is not correct Only snow and noise appear on the screen Dotted lines or stripes Double images Good picture, no sound Audio noise Possible Solutions ! Make sure the power cord is plugged in. ! Press POWER on the TV or on the remote control. ! Try another channel; it could be station trouble. ! Select a proper picture mode. ! Adjust the brightness in the video setting. ! Check the antenna connections. ! Adjust the color saturation in the video setting. ! Check the antenna connections. ! Try another channel; it could be station trouble. ! Adjust the antenna. ! Move the TV away from noise sources such as cars, neon signs, or hair dryers. ! Using a highly directional outdoor antenna or a cable may solve the problem. ! The sound may be muted. Press MUTE again to cancel. ! Make sure the stereo mode is set to stereo or mono. ! Communication problems may occur if infrared communication equipment (e.g., infrared cordless headphones) is used near the TV. Move the infrared communication equipment away from the TV until the noise is eliminated. 31