Palsonic TFTV580 Owners Manual - Page 11
Connecting External Device, Notes about connection, Composite Video signal connection, S-VIDEO
View all Palsonic TFTV580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Connecting External Device Notes about connection 1. Carefully check the terminals for position and type before making any connections. 2. Loose connectors will result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. 3. When connecting an external device, turn off the power of the main unit first to prevent any possible damage. 4. Please refer to the instruction manual of the equipment to be connected as well. Composite Video signal connection Connect the composite video signal terminal on the TV to the output of AV equipment through composite cable. If you select the video signal, please set the input signal source of LCD-TV to AV1/AV2 mode. To audio inputs R W To audio outputs R W VCR, DVD etc. Y Y To video input To audio inputs R To video output AUDIO W Y Yellow (video) Y To video input W White (audio, L) R Red (audio, R) Note: Composite video signal is the most common signal, but the picture quality is not very good. S-VIDEO Signal Connection Connect the S-video terminal on the TV to the output of AV equipment through S-video cable. If you select S-video signal, please set the input signal source of LCD-TV to SVIDEO mode. W White (audio, L) R Red (audio, R) To S-VIDEO input R W To audio inputs To S-VIDEO output R W To audio outputs VCR, DVD etc. Note: S-Video is a signal format which transfers the colour and bright of the picture respectively. The picture quality is better than composite signal. 9