Palsonic pw112sbf Instruction Manual - Page 8

MAINTENANCE, Trouble shooting

Page 8 highlights

Defrost the freezing compartment whenever the layer of frost on the surface of the evaporator reaches 3 or 4 mm. When defrosting remove all food and set the thermostat at "OFF" position. Put the drip tray under the evaporator to collect melted water. After the frost has melted, discard the melted water and dry up the interior of refrigerator. The refrigerator can then be restarted by turning its thermostat to the desired setting. 5.2 Cleaning the Interior and the Exterior of the Unit ◆ Remove all the shelves and the salad bin. To remove the salad bin first remove the lower door shelf. ◆ Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm water using a damp sponge or cloth. Wipe completely dry before replacing the shelves and salad bin. ◆ Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make sure that the door is closed to avoid the polish getting on the magnetic door seal or inside the unit. ◆ The grille of the condenser at the back of the unit and the adjacent components can be vacuumed using a soft brush attachment. 5.3 Cleaning Tips Condensation may appear on the outside of the unit. This may be due to a change in room temperature. Wipe of any moisture residue. If the problem continues, please contact a qualified technician for assistance. 6. MAINTENANCE 6.1 Changing the Internal Light ◆ Illuminating lamp parameter: MAX15W ◆ Lighting lamps replacement: First unplug the refrigerator-freezer. As specified in the drawing, first remove the lighting lampshade lamp cover on the arrow, and then replace the bulb. 6.2 Care When Handling / Moving Your Unit Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface. 6.3 Servicing The unit should be serviced by an authorized engineer and only genuine spare parts should be used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact a qualified technician. 6.4 Switching Of for Long Periods of Time When the unit is not in use for a long period of time, disconnect it from the mains supply, empty all food and clean the appliance, leaving the door ajar to prevent unpleasant smells. 7. Trouble shooting The following simple issues can be handled by the user. Please call the after-sale service 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

6
Defrost the freezing compartment whenever the layer of frost on the surface of the evaporator
reaches 3 or 4 mm. When defrosting remove all food and set the thermostat at “OFF” position.
Put the drip tray under the evaporator to collect melted water. After the frost has melted,
discard the melted water and dry up the interior of refrigerator. The refrigerator can then be
restarted by turning its thermostat to the desired setting.
5.2
Cleaning the Interior and the Exterior of the Unit
Remove all the shelves and the salad bin. To remove the salad bin first remove the lower
door shelf.
Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with
warm water using a
damp
sponge or cloth. Wipe completely dry before replacing the
shelves and salad bin.
Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make
sure that the door is closed to avoid the polish getting on the magnetic door seal or inside
the unit.
The grille of the condenser at the back of the unit and the adjacent components can be
vacuumed using a soft brush attachment.
5.3
Cleaning Tips
Condensation may appear on the outside of the unit. This may be due to a change in room
temperature. Wipe of any moisture residue. If the problem continues, please contact a qualified
technician for assistance.
6.
MAINTENANCE
6.1
Changing the Internal Light
Illuminating lamp parameter: MAX15W
Lighting lamps replacement:
First unplug the refrigerator-freezer.
As specified in the drawing, first remove the lighting lampshade
on the arrow, and then replace the bulb.
6.2
Care When Handling / Moving Your Unit
Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted
by holding the edges of the top surface.
6.3
Servicing
The unit should be serviced by an authorized engineer and only genuine spare parts should be
used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried
out by inexperienced persons may cause injury or serious
malfunction
. Contact a
quali
fied
technician.
6.4
Switching Of for Long Periods of Time
When the unit is not in use for a long period of time, disconnect it from the mains supply, empty
all food and clean the appliance, leaving the door ajar to prevent unpleasant smells.
7.
Trouble shooting
The following simple issues can be handled by the user. Please call the after-sale service
lamp cover