Palsonic pw69sbf Instruction Manual - Page 5

4) Slide the Appliance door down about 15cm and off the top hinge pin and lift away from the Appliance. 5) Remove the two screws from top bracket and replace on the otherside.You will need to first remove the plastic caps from the other side. 6) Slide the Appliance door back on to the Top hinge, making sure it's the right way up. Screw the bottom hinge into place on the new side. Replace the other foot on the other side.Replace the plastic covering by clicking back into position on the door hinge. 7) Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the levelling feet. 2.3 Door Space Requirements The unit's door must be able to open fully as shown. 880 2.4 Levelling the Unit To do this adjust the two levelling feet at the front of the unit. If the unit is not level, the door and magnetic seal alignments will not be covered properly. 3 800