Palsonic pw69sbf Instruction Manual - Page 7
Operation
View all Palsonic pw69sbf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Thermostat Drain tray Steel wire shelf Adjustable foot Small door Wire steel bar *All images in this instruction manual are for indication only; please refer to your individual unit for details. 4. OPERATION 4.1 Adjusting the Temperature ◆The temperature selector knob is located on the right hand side wall of the refrigerator interior Setting"Off":Unit Off Setting"Min":Less Cool Temperature Setting"Med":Normal Operation(adequate for most situations) Setting"Max":Coolest Temperature ◆During high ambient temperatures e.g. on hot summer days. It may be necessary to set the thermostat to the Coolest setting(position "Max").This may cause the compressor running continuously in order to maintain a low temperature in the cabinet. ◆For the first time you install your refrigerator, set the thermostat knob at "Med". Give your refrigerator time to cool down completely before adding food. It is the best to wait 24 hours before adding food. The thermostat knob controls the temperature. When the thermostat control knob is set to OFF, the refrigerator will not be running. 4.2 Noise Inside the Unit! You may notice that your unit makes some unusual noises. Most of these are perfectly normal, but you should be aware of them! These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has become more pronounced since the introduction of CFC free gases. This is not a fault and will not affect the performance of your unit. This is the compressor motor working, as it pumps the 5