Panasonic AG-DVX200PJ Operating Instructions - Volume 2 - Page 19

Checking the remaining power of the battery You can check the remaining power of the battery by looking at the battery capacity indication displayed on this unit's screen or by looking at the supplied battery VW-VBD58. ∫ Checking the remaining power using this unit Battery capacity indication ≥ The display changes as the battery capacity reduces. If the battery discharges, then will flash red. # # # # ≥ Depending on the menu setting, the battery capacity indication is not displayed (l 174) [DISP SETUP] # [CARD & BATTERY] ∫ Checking the remaining power using the battery If you press the CHECK button, the remaining power indicator (LED lamp) lights up green, allowing you to check the remaining power of the battery. 0 100 % CHECK   A CHECK button B Remaining power indicator ≥ The remaining power of the battery is an approximate guide. ≥ When the LED lamp does not light up even if you press the CHECK button, the battery is exhausted. Charge the battery. How to read the remaining power indicator :Lit up/ :Off LED lamp status Remaining power of the battery 0% to 25% 25% to 50% 50% to 75% 75% to 100% ≥ The display of the remaining power indicator is an approximate guide for the remaining power of the battery. When the battery pack is connected to the video camera or the charger, refer to the remaining power display of the connected device. The display of the connected device may differ from that of the battery pack's remaining power indicator. - 19 -