Panasonic AG-UX180 AG-UX180 Brochure - Page 12

Equipped with Professional Interfaces 3G-SDI for connecting to an External 1080/60p, 1080/50p Recorder The 3G-SDI output terminal (BNC connector, 5CFV) can be used to transmit FHD 1080/60p, 1080/50p signals through a coaxial cable over a distance of up to 100 m. Panasonic recorders equipped with SDI input can be linked to the Rec Start/Stop function of the AG-UX180. AG-UX180 3G-SDI (BNC) AJ-PG50 etc. Panasonic Professional HD Recorder HDMI Output and Video/Audio Output • HDMI OUT*1: Outputs images up to 4K 24p, UHD 60p and UHD 50p*2. • VIDEO/AUDIO OUT: Outputs analog signals for video and audio monitoring. *1: HDMI and SDI signals cannot be output simultaneously. *2: Images output during UHD 60p and UHD 50p recording are FHD. 16-Bit PCM for High-Sound-Quality*3 Professional Audio Recording Equipped with two channels of XLR audio input (with switchable 48 V phantom power supply, MIC and LINE) and manual audio volume. This enables recording of two highquality audio channels using either the 16 bit linear PCM system (MOV/MP4) or Dolby Digital system (AVCHD). Other professional features include the OSD level meter, 1 kHz test tone output*4 and headphone output (3.5 mm-diameter stereo mini-jack). *3: When the MOV/MP4 recording mode is selected *4: This output is produced when the color bar is displayed. When the 50-Hz system frequency is selected, the output is 997 Hz. TC Synchro Multi-Camera Recording Supported The TC PRESET IN/OUT terminal (BNC) allows synchronization of the initial value for the time code in multi-camera shooting. The camera number (0 to 16) can be added*5 to the name of the recording folder to facilitate editing. *5: Only when the MOV/MP4 codec is used for recording. Setting must be made in each camera. MASTER CAM-1 100RARH1 TC PRESET IN/OUT SLAVE CAM-2 100RARH2 SLAVE CAM-3 100RARH3 SLAVE CAM-4 100RARH4 11