Panasonic AGDVC20P 3 Ccd Dv Camcorder - Page 26
Playback mode, Playing back tape, Slow-motion playback/frame-by-frame playback, playback
View all Panasonic AGDVC20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Playback mode Playing back tape ≥Set to Tape Playback Mode. CAMERA VCR 1 Operate with cursor buttons. Playback mode Slow-motion playback/frame-by-frame playback ≥Set to Tape Playback Mode. (Slow-motion playback can only be performed by using the remote control.) Slow-motion playback If the image is recorded in the SP mode, then it will be played back at a speed approx. 1/5 the normal speed. If the image is recorded in the LP mode, then it will be played back at a speed approx. 1/3 the normal speed. 1 During playback, press the [E] button or the [D] button on the remote control. V/REW PLAY FF/W STILL ADV PAUSE STILL ADV W VOL STOP 1/;: 6: 5: ∫: Playback/Pause Rewind/Review playback (Reverts to playback with the 1/; icon.) Fast forward/Cue playback (Reverts to playback with the 1/; icon.) Stop ≥During cue/review playback, fast-moving images may show noise as a mosaic. ≥Before and after cue/review playback, the screen may become blue for a moment or images may be disturbed. ª To adjust volume Adjust the speaker or headphone volume for playback. 1 Move the [W/T] lever (or sub zoom lever) to adjust the volume. ≥If the slow-motion playback continues for approx. 10 minutes or more, then the playback will automatically stop. (10 minutes of slow-motion playback is equivalent to approx. 2 minutes in the SP mode or approx. 3 minutes in the LP mode.) Frame-by-frame playback 1 During playback, press the [;] button on the remote control. 2 Press the [E] button or the [D] button on the remote control. V/REW PLAY FF/W STILL ADV PAUSE STILL ADV W VOL STOP Towards [T]: increases the volume Towards [W]: decreases the volume (Nearer the bar to [r], larger the volume.) ≥On the remote control, press the [T] button to increase the volume or the [W] button to decrease it. ≥When the adjustment is completed, the volume indication will disappear. ≥If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO]. ª Repeat playback When the tape end is reached, the tape will be rewound and played back again. 1 Set [ADVANCE] >> [REPEAT PLAY] >> [ON]. ≥The [ ] indication appears. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or set [OFF/ON] switch to [OFF].) ª Settings on the audio ≥If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. ≥When you record or dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT]. ≥Pushing the [W/T] lever (or sub zoom lever) towards [T] (normal direction) or towards [W] (reversed direction) of this camera-recorder during playback pause also turns into the frame-by-frame playback. If you keep pushing the lever, then the images will continuously be played back frame by frame. ª To return to normal playback Press the [1] button on the remote control. Slow-motion playback ≥In the reversed slow-motion playback, the time code indication may be unstable. Frame-by-frame playback ≥Press and hold the [E] or the [D] button in the playback pause, and then the images will continuously be played back frame by frame. 26