Panasonic AGDVC20P 3 Ccd Dv Camcorder - Page 33

Others Others Indications Various functions and the camera-recorder status are shown on the screen. Basic indications : Remaining battery power 0h00m00s00f: Time code 3:30:45PM: Date/Time indication Recording indications R0:45: Remaining tape time ≥Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.) SP: Standard Play mode (Recording speed mode) -19- LP: Long Play mode (Recording speed mode) -19- ¥: Recording -19- ; (Green): Recording pause -19- Fade out (when the DV terminal is connected) ; (Green flash): Standby mode ; (Red): Fade out : Recording check -19- CINEMA : Cinema mode -23- : Digital zoom -20- AUTO : Automatic mode -18- MNL : Manual mode -23-, -24-, -25- MF: Manual focus -25- 5k: Zoom magnification indication -20- : Backlight mode -21- EIS : Image stabilizer -23- 1/500: Shutter speed -25- F2.4: F number -25- 6dB: Gain value -25- : Soft skin mode -22- : Tele macro -22- : Fade (White) -22- : Fade (Black) -22- : Color night view function -21- 0Lux : 0 Lux night view function -21- : ZOOM Zoom microphone -20- : Microphone sensitivity level -20- : 5: Wind noise reduction -22Sports mode (Scene mode) -23- : Portrait mode (Scene mode) -23- : Low light mode (Scene mode) -23- : Spotlight mode (Scene mode) -23- : Surf & snow mode (Scene mode) -23- AWB : Auto white balance -24- : Indoor mode (recording under incandescent lamp) -24- : Outdoor mode -24- : White balance adjustment mode -24- : Blank search -19- Playback indications ¥: Recording underway 1: Playback -26- ;: Pause -26- 5: 6: D/E: ;1/2;: 2k5: Fast-forward/Cue playback -26Rewind/Review playback -26Slow motion playback -26Frame-by-frame playback -26Variable-speed search -27- : A.DUB ¥: A.DUB ;: Repeat playback -26Audio dubbing -30Audio dubbing pause -30- : Blank search -19- 12bit, 16bit: Audio recording mode -32- : Volume adjustment -26- Warning/alarm indications If any one of the following indications lights up or flashes, please check the camera-recorder. Confirmatory indications Y: A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted. No cassette is inserted. [--]/0: The built-in battery is low. -15°: The warning/alarm indication appears when you record yourself. Turn the LCD monitor towards the viewfinder and check the warning/alarm indication. REMOTE: An incorrect remote control mode has been selected. -172END: The tape came to the end during recording. :: The video heads are dirty. -36Textual indications 3DEW DETECT/3EJECT TAPE: Condensation has occurred. Take out the cassette and wait for a while. It takes some time until the cassette holder opens, but this is not a malfunction. -36LOW BATTERY: The battery is low. Recharge it. -10NO TAPE: No tape is inserted. -12TAPE END: The tape came to the end during recording. CHECK REC TAB: You are attempting to record pictures on a tape with the accidental erasure prevention slider placed in the [SAVE] position. You are attempting audio dubbing or digital dubbing on a tape with the accidental erasure prevention slider placed in the [SAVE] position. CHECK REMOTE MODE: An incorrect remote control mode has been selected. This is only displayed at the first operation of the remote control after powering-on. -17WRONG TAPE FORMAT: You are attempting to play back a tape section that has been recorded with a different TV system. This cassette is incompatible. UNABLE TO A.DUB (LP RECORDED): Audio dubbing cannot be performed because the original recording was in LP mode. UNABLE TO A.DUB: You are attempting to perform audio dubbing on a non-recorded tape. COPY PROTECTED: Images cannot be recorded correctly because the medium is protected by a copy guard. NEED HEAD CLEANING: The video heads are dirty. -36PUSH THE RESET SWITCH: An irregularity in the equipment has been detected.Press the reset button (-8-). This may solve the problem. You connect a device except for the DV format to the DV terminal. Pull out the DV cable, and press the reset button (-8-). CHANGE TO MANUAL MODE: You are attempting to select the item on the [SCENE MODE] when the [AUTO/MANUAL/FOCUS] switch is set to [AUTO]. REVERSE THE LCD MONITOR: At the time of 0 Lux night view mode, when LCD monitor is not reversed, it displays. When the LCD monitor is rotated by 180° towards the lens, the brightness of the LCD monitor cannot be adjusted. 33