Panasonic AW-HE120K Operating Instructions - Page 33
Operating, Instructions
View all Panasonic AW-HE120K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Operating precautions (continued) Turn off the power before connecting or disconnecting the cables. Always be sure to turn off the power before connecting or disconnecting the cables. Handle the unit carefully. Do not drop the unit or subject it to strong impact or vibration. Doing so may cause the unit to malfunction. When the unit is not in use Turn off the unit's power when it is not in use. When the unit is no longer going to be used, do not leave it lying around, but be absolutely sure to dispose of it properly. Do not touch the optical system parts. The optical system parts are the very heart of the camera. Under no circumstances must they be touched. In the unlikely event that they have become dusty, remove the dust by using a camera blower or by wiping them gently with a lens cleaning paper. Do not point the camera directly at the sun or a laser beam no matter whether it is turned on or not. Taking images of the sun, laser beams, or other brightly lit subjects for prolonged periods of time may damage the CCD. Personal computer used If the same image is displayed for a prolonged period on a PC monitor, the monitor may be damaged. Use of a screen saver is recommended. Keep the unit away from water. Avoid all direct contact with water. Otherwise, problems may occur. Maintenance Turn off the unit's power before proceeding with maintenance. Otherwise, you may injure yourself. Wipe the surfaces using a soft dry cloth. Avoid all contact with benzene, paint thinners and other volatile substances, and avoid using these substances. Otherwise, the casing may become discolored. Do not turn the camera head by hand. Turning the camera head by hand may cause the unit to malfunction. Use the unit in an environment with minimal moisture and dust. Avoid using the unit in an environment with high concentration of moisture or dust since these conditions will damage the internal parts. Disposal of the unit When the unit has reached the end of its service life and is to be disposed of, ask a qualified contractor to dispose of the unit properly in order to protect the environment. Concerning the IP address setting Do not run the Easy IP Setup Software on a multiple number of personal computers for a single camera and set the IP address at the same time. Otherwise, you will be unable to complete the proper procedure and set the IP address correctly. Do not allow foreign matter to make contact with the rotating parts. Otherwise, trouble may be caused. Operating Instructions Before use 33