Panasonic AW-HE120K Operating Instructions - Page 6
Installation precautions - manual
View all Panasonic AW-HE120K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation precautions To installation personnel Read the Instructions thoroughly and then perform the operation correctly and safely. Also, always read the "Read this first!" on page 5 of this manual as they contain important information. After the installation, give this Instruction manual to the customer to save for future use. Ensure that the installation work complies with the technical standards governing electrical equipment. This unit is for indoor use only. It cannot be used outdoors. Avoid installation in a location where the unit will be exposed to direct sunlight for extended periods or near a cooling or heating appliance. Otherwise, deformation, discoloration, malfunctioning and/or problems in operation may result. Operate the unit where it will not be splashed or sprayed by water. Use the unit with an installation where the unit is suspended from an overhead surface or with a stand-alone installation. Do not use the unit on its side or tilted at an angle. Notes Be absolutely sure to use the four bracket mounting screws (M4) for mounting the mount bracket. These are supplied with the unit. Do not use wood screws, nails, etc. In the case of a concrete ceiling, secure the unit using anchor bolts (for M4) or AY plug bolts (for M4). Recommended clamping torque M4: 1.47 N · m {15 kgf · cm} The withdrawal strength of the mounting location for each screw must be at least 294 N {30 kgf}. When mounting the unit on a ceiling made of plasterboard, for instance, if it is not strong enough to support its weight, either reinforce the ceiling adequately or use the WV-Q105 direct ceiling mount bracket, which is sold separately. When using a mount bracket which is sold separately, read the handling instructions. Do not hold the camera head while undertaking the installation work. Doing so may cause malfunctioning. OK NG OK NG Desktop installation Hanging installation Concerning the installation location Install the unit in a stable location which will not be susceptible to shaking. If the unit is installed in a location which is susceptible to shaking, this will cause the unit's images to shake in turn. Install the unit after conferring in detail with your dealer. Install the unit on a ceiling that is strong enough (such as a concrete ceiling). If the unit is to be installed on a ceiling which is not strong enough, reinforce the ceiling sufficiently first. Do not install or use the unit in the following kinds of locations. On walls (where the unit would be installed sideways) In locations (including places such as under the eaves of a building) where the unit would be directly exposed to rain or water In locations such as kitchens where there are high concentrations of steam and grease In outdoor locations or hot places where the temperature will exceed 40 °C (104 °F) In cold locations where the temperature will drop below 0 °C (32 °F) In locations where the humidity will exceed 85 % In locations where chemicals are used such as near swimming pools At sea, in coastal areas or in locations where corrosive gases are emitted In locations where radiation, X-rays, or strong radio waves or magnetic fields are generated In locations where the unit would be subject to a great deal of vibration such as on board a vehicle or ship (this unit is not designed to be used in vehicles) In locations where the temperature is subject to sudden changes such as near the air outlet of an air conditioner or near a door which allows the outside air to come in What to avoid to ensure that the unit will perform stably over a prolonged period Using the unit for a prolonged period in a location with high temperature and humidity levels will cause its parts to deteriorate and shorten its service life. Ensure that a cooling unit or heating unit will not blow any air directly toward the installation location. AW-HE120 main unit Mass Approx. 3.0 kg [6.61 lbs] (Including mount bracket) Mounting conditions Applicable mount bracket Mounting onto the ceiling Model No. Mass Mounting Recommended No. of screws screws Minimum withdrawal strength (per screw) Direct mount (supplied accessory) WV-Q105 (optional accessory) Approx. 0.4 kg [0.88 lbs] Approx. 0.15 kg [0.33 lbs] Hanging/Desktop For ceiling M4 screws (supplied accessory) M4 screws (supplied with the WV-Q105) 294 N {30 kgf} 4 Ensure that the mounting strength can support a weight that is at least five times the total mass of the 4 equipment, including the camera's main unit. 6