Panasonic AW-HE42 Operating Instructions 1 - Page 63
RS-232C connectors [RS-232C IN/OUT], LAN connector for IP control [LINK/ACT]
![]() |
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Parts and their functions (continued) Operating Instructions iLAN connector for IP control [LINK/ACT] This LAN connector (RJ-45) is connected when exercising IP control over the unit from an external device. Use a cable with the following specifications for the connection to the LAN connector: When connecting through a hub: LAN cable* (category 5 or above), max. 100 meters [328 ft] When using a PoE+ compatible hub: LAN cable* (category 5e or above), max. 100 meters [328 ft] When a hub is not used: LAN cable* (category 5 or above), max. 100 meters [328 ft] *: Use of an STP (shielded twisted pair) cable is recommended. jAnti-theft wire mounting hole Use this hole to attach the wire bracket (commercially available). pRS-422 connector [RS-422] This RS-422 connector (RJ-45) is connected when exercising serial control over the unit from an external device. Use a cable with the following specifications for the connection to this connector. The tally lamp can be lit by shorting the TALLY signal (pin 2) with GND (pin 1). Note ●● Do not apply a voltage to the TALLY signal pin. LAN cable* (category 5 or above, straight cable), max. 1000 meters [3280 ft] *: Use of an STP (shielded twisted pair) cable is recommended. 1357 2468 Pin No. Signal 1 GND 2 TALLY 3 RXD - 4 TXD - Pin No. Signal 5 TXD + 6 RXD + 7- 8- kAudio input connector [AUDIO IN] Inputs external audio (microphone, line). lRS-232C connectors [RS-232C IN/OUT] Connect to RS-232C cables. RS-232C IN/OUT connector 1 2 3 6 4 5 7 8 ● M ini DIN 8-pin (JST) RS-232C IN Pin No. Signal 1 DTR_IN 2 DSR_IN 3 TXD_IN 4 GND 5 RXD_IN 6 GND 7 IR OUT R 8 IR OUT L RS-232C OUT Pin No. Signal 1 DTR_OUT 2 DSR_OUT 3 TXD_OUT 4 GND 5 RXD_OUT 6 GND 7 NC 8 NC Note ●● Be aware that the polarities (+/−) of the serial data may be different depending on the specifications of the device to be connected. qUSB port The unit can be used as a Web camera by connecting the unit and a personal computer with USB Video Class. rmicroSD card slot The video and audio of the camera can be recorded to a microSD card in MP4 format. sThreaded hole (thread: 1/4-20UNC, ISO1222 [6.35 mm]) for mounting the camera Use this hole when mounting the camera on a tripod, etc. tHDMI connector [HDMI] This is the HDMI video signal output connector. For limitations that pertain when simultaneously outputting HDMI and SDI signals, refer to the Operating Instructions (PDF) → "Camera menu items" → "Output screen" → "Format". mDC IN connector [12V IN ] Connect the AC adaptor supplied with the unit to this connector to supply the DC 12 V voltage to the unit. nCable clamp This is used to hold the cable connection to the DC IN connector and prevent it from becoming disconnected. uSDI OUT connector [SDI OUT] This is the SDI video signal output connector. For limitations that pertain when simultaneously outputting HDMI and SDI signals, refer to the Operating Instructions (PDF) → "Camera menu items" → "Output screen" → "Format". oGround connector Connects to the ground connector on a wall outlet, ground bar, etc. for grounding. (page 26) 63
![](/manual_guide/products/panasonic-awhe42-operating-instructions-2cd765f/63.png)