Panasonic BB-HCM735A Installation Guide - Page 1
Panasonic BB-HCM735A - Network Camera - PTZ Manual
UPC - 037988845620
View all Panasonic BB-HCM735A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation Guide Network Camera (PoE Ready) Model No. BB-HCM715 BB-HCM735 Please read this document before using the product, and save this document for future reference. Panasonic Network Camera Website: http://panasonic.net/pcc/ipcam/ Indoor Use Only Outdoor Ready This manual is written for both the BB-HCM715 (Indoor Use Only) and the BB-HCM735 (Outdoor Ready). Available features and operations vary slightly depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera. Model number suffixes ("A" and "CE") are omitted from the following model numbers shown in this document, unless necessary. BB-HCM715A, BB-HCM715CE, BB-HCM735A, BB-HCM735CE Please read the included Important Information before proceeding. Complete Operating Instructions and all other documentation can be found on the included CD-ROM. • This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place the camera for regular use. • The Setup Guide describes how to set up the camera so that it can be accessed using a PC. • Refer to the Operating Instructions on the CD-ROM for details regarding the camera's features. • Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera. • The Stand-alone SD Memory Card Recording Guide describes how to record images to an SD memory card without using a PC. • The illustrations used in Installation Guide are of BB-HCM735. Abbreviations • UPnP is the abbreviation for "Universal Plug and Play". • The Network Camera is referred to as "the camera" in this document. • The Setup CD-ROM is referred to as "the CD-ROM" in this document. • The term "SD memory card" is used in this document to refer to SD memory cards and SDHC memory cards. Installation Procedure Overview The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted. Preparation Confirm that you have all the items required for installation. Camera Diagram Make sure you know the names of the camera's physical features. Connections Connecting the camera to your network and to the power outlet. Setup Setting up the camera (described in the included Setup Guide). This involves configuring the camera so that it can be accessed from a PC. Mounting Mounting or placing the camera. Preparation 1. Confirm the following items are included in the camera's packaging. Main Unit (1 pc.) Flexible Stand (1 pc.) Order No. PNZMHCM515A Screw A BB-HCM715 (1pc. for the safety wire) Order No. PQHV2610PJ65 BB-HCM735 (1pc. for the safety wire, 4pcs. for the connector cover) Order No. XTN26+10GVW Screw B (1pc. for the safety wire, 3pcs. for the flexible stand) Order No. XTB4+20AFJ Important Information (1 pc.) Installation Guide (this document) (1 pc.) Setup Guide (1 pc.) Stand-alone SD Memory Card Recording Guide (1 pc.) Sunshade (1pc.) [BB-HCM735 Only] Order No. PQKV10074Z1 Connector Cover (1pc.) [BB-HCM735 Only] Order No. PQYCHCM531A Safety Wire (1 pc.) Order No. PQME10080Z Used to secure the camera when mounting it. Washer S (1 pc.) Order No. XWG26D12VW Used when securing the safety wire to the camera. SD Card Cover (Hard type) (1pc.) [BB-HCM715 Only] Order No. PNKV1065Z1 Washer L (1 pc.) Order No. XWG4F16VW Used when securing the safety wire to the ceiling or wall. Setup CD-ROM (1 pc.) Order No. PNQC1016N Contains the Setup Program needed to configure the camera, as well as the camera's documentation.* *See the included Important Information for a description of each document. Foam Strip (1pc.) [BB-HCM735 Only] Order No. PQHG10748Z Self Bonding Tape (1pc.) [BB-HCM735 Only] Order No. PSHG1235Z 2. You will need the following additional items to install and configure the camera. - a PC (see the system requirements in the Important Information document) - a router - a LAN cable (CAT-5 straight cable) Option You can also connect the camera using the optional Panasonic BB-HCA7A, BB-HCA7CE or BB-HCA7E AC adaptor. The optional AC adaptor includes the following items. (For more information, consult your authorized Panasonic dealer.) BB-HCA7A AC Adaptor (1 pc.) Cord Length: About 3 m (9 feet 10 inches) AC Cord (1 pc.) Cord Length: About 1.8 m (5 feet 11 inches) Extension Cord (1 pc.) Cord Length: About 7 m (23 feet) BB-HCA7CE (2 pin AC cord) AC Adaptor (1 pc.) Cord Length: About 3 m (9 feet 10 inches) AC Cord (1 pc.) Cord Length: About 1.8 m (5 feet 11 inches) Extension Cord (1 pc.) Cord Length: About 7 m (23 feet) BB-HCA7E (3 pin AC cord) AC Adaptor (1 pc.) Cord Length: About 3 m (9 feet 10 inches) AC Cord (1 pc.) Cord Length: About 1.8 m (5 feet 11 inches) Extension Cord (1 pc.) Cord Length: About 7 m (23 feet) • The AC adaptor, the AC adaptor cord, the AC cord, and the extension cord are not splash resistant, and are intended for indoor use only. The AC adaptor, the AC adaptor cord, the AC cord, and the extension cord must be waterproofed for outside use. © Panasonic System Networks Co., Ltd. 2009 PNQX2129YA KK0609CM1129 1