Panasonic BL-C1A Ip Camera - Page 100
Updating the Camera Firmware, Click [Update Firmware] on the Maintenance - firmware download
UPC - 037988845040
View all Panasonic BL-C1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Operating Instructions 6.1.6 Updating the Camera Firmware The Update Firmware page allows you to update the camera's firmware. If new firmware is available, install it into the camera. Note • • • Do not turn off the power during a firmware update. All buffered images and sensor logs on the internal memory will be deleted after the firmware update. The firmware version is displayed on the Top page and the Status page. 1. Download the new firmware from the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it on your PC. 2. Click [Update Firmware] on the Maintenance page. 3. Click [Update Firmware]. • The procedure can take up to 7 minutes for BL-C1A or 8 minutes for BLC20A. • The camera restarts. Restart operation takes up to 1 minute for BL-C1A or 90 seconds for BL-C20A. 100