Panasonic BL-C1A Ip Camera - Page 4
Camera Feature Locations - firmware
UPC - 037988845040
View all Panasonic BL-C1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Operating Instructions Camera Feature Locations BL-C1A Front View Indicator The indicator color shows camera status. (See page 96) Lens (Focus: 0.3 m [about 11 13/16 inches]- Unlimited) Indicator Display*1 Power on Not on LAN On LAN Orange Orange Orange blinking Orange blinking Green blinking Green Normal Operation*2 Green Automatic Setting Setup Finished setting Green blinking Green Using DHCP Getting IP address*3 Got IP address Orange blinking Green blinking Green Updating Firmware Orange blinking FACTORY DEFAULT RESET button pressed Orange blinking Turning off (about 5 seconds) The status when turned on (The camera is reset to factory default status after 1 minute.) UPnPTM Failure Orange blinking (About a 2-second interval) Internal Failure Red blinking*4 *1 The information below varies depending on the indicator settings (see page 96). *2 The indicator turns orange if the camera is not connected to the LAN. *3 The indicator blinks orange if the camera is not connected to the LAN. *4 See page 4 of the Troubleshooting on the CD-ROM. 4