Panasonic BL-MS103A BL-MS103A Owner's Manual (English) - Page 72
SD MEMORY CARDS, Ejecting an SD memory card
![]() |
View all Panasonic BL-MS103A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4 Recording Images • See page 84 for more information on recording frame rates for sensor recording. Record Mode HIGH LOW LONG Resolution 640 x 480 320 x 240* 320 x 240* Image Refresh Interval 1 sec. 1 sec. 5 sec. *When recording in LOW or LONG mode, a smaller image is recorded and the image appears smaller during playback. • We recommend using a recording mode of either HIGH or LOW for sensor recording. 4.1 SD Memory Cards We recommend using Panasonic SD memory cards with the BL-WV10A. (We cannot guarantee the performance of SD memory cards made by other manufacturers.) Cards with capacities of up to 1 GB can be used. Inserting an SD memory card Ejecting an SD memory card Timer/Access indicator Insert label side up, with notch on right side Push the SD memory card slightly, then remove it CAUTION When the timer/access indicator is flashing amber, data is either being read from or written to the card. When the indicator is flashing amber, do not do any of the following: • Remove the SD memory card. • Turn off the BL-WV10A. • Press the FACTORY DEFAULT RESET button. Doing so can result in corrupted data on the SD memory card. If this occurs, the card cannot be used and you will need to reformat the card with the BL-WV10A. All data on the card will be erased. Note • Do not use the SD memory card used for the BL-WV10A in other devices (digital cameras, video cameras, etc.). Only image data (movies and pictures) that were recorded with the BL-WV10A can be viewed with the 72
![](/manual_guide/products/panasonic-blms103a-blms103a-owners-manual-english-6fadb41/72.png)