Panasonic BT300 Blu-ray Disc Home Theater Sound System - Page 39
TV / Device Connection, HDMI RGB Output Range - plasma
UPC - 037988983520
View all Panasonic BT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
"TV / Device Connection" TV Aspect Set to match the type of TV connected. Time Delay*1 When connected with a Plasma display, adjust if you notice the audio is out of sync with the video. When connected to a 16:9 widescreen TV: ≥16:9: Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio image in the center of the screen. When connected to a 4:3 aspect TV: ≥4:3: Video recorded for a widescreen is played as Pan & Scan (unless prohibited by the producer of the disc). When playing BD-Video, video is output as "4:3 Letterbox". ≥4:3 Letterbox: Video recorded for a widescreen is played in the letterbox style. ≥Auto ≥0ms ≥20ms ≥40ms ≥60ms ≥80ms ≥100ms ≥120ms ≥140ms When using VIERA Link "HDAVI Control" with "HDAVI Control 3" (or later) compatible TV (> 28), select "Auto". Audio and video will automatically be set in sync. - This works only when "BD/DVD", "SD", "AUX (TV)", "D-IN 1" (DIGITAL IN 1 (TV)) or "D-IN 2" (DIGITAL IN 2 (CABLE/SAT)) is selected as the source. (> 29) HDMI Connection ≥Press [OK] to show the following settings. HDMI Video Mode Select "On" when video is output from HDMI AV OUT terminal. HDMI Resolution*2 The items supported by the connected devices are indicated on the screen as "¢". When any item without "¢" is selected, the images may be distorted. 24p Output [BD-V] [DVD-V] When this unit is connected to a TV supporting 1080/24p output via an HDMI cable, this unit displays each frame at 1/24 second intervals - the same interval originally shot with the film camera. ≥When playing DVD-Video, set to "On" and then set "24p" in "Video" (> 36) to "On" HDMI RGB Output Range Effective when connected to a device that only supports RGB output. HDMI Audio Output This setting selects whether or not to output audio from HDMI. VIERA Link Set to use "HDAVI Control" function when connected with an HDMI cable to a device that supports "HDAVI Control". Power Off Link Select the desired power off link setting of this unit for VIERA Link operation (> 29). (This works depending on the settings of the connected VIERA Link "HDAVI Control" compatible equipment.) Component Video Resolution*2 This sets the video output resolution when using COMPONENT VIDEO OUT terminals. ≥On: ≥Off Images are output from the HDMI AV OUT terminal in the resolution set in "HDMI Resolution". Video from COMPONENT VIDEO OUT terminal is output as "480i". Images are output in the resolution set in "Component Video Resolution". ≥Auto: Automatically selects the output resolution best suited to the ≥480p connected TV (1080p, 1080i, 720p or 480p). ≥720p ≥1080i ≥1080p - When outputting 1080p signal, we recommend using High Speed HDMI Cables that have the HDMI logo (as shown on the cover) and are less than 5.0 meters to prevent video distortion etc. - To enjoy high definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible. ≥On: Images in 24p are output in 24p as they are. However, - when video is being output at 24 frames, images from any other terminal than the HDMI AV OUT terminal may not be output properly. - [BD-V] : when images other than 24p are played, images are output at 60p. ≥Off: ≥Standard: ≥Enhanced: The video is output as it is. When the black and white contrast of a video is low, the signal is enhanced to reproduce clear video. ≥On: ≥Off: To output audio through the TV's speakers or other devices. To output audio through system speakers. (The audio is output using the settings of the main unit.) ≥On: ≥Off: Select when you do not want to use "HDAVI Control". ≥Video/Audio: ≥Video: When the TV is turned off, this unit will turn off automatically. When the TV is turned off, this unit will turn off except during the following conditions: - audio playback ([CD] [MP3]) - iPod mode - radio mode - "AUX" or "D-IN1" (DIGITAL IN 1) mode (non-selected TV audio setting for VIERA Link) - "D-IN2" (DIGITAL IN 2) mode (non-selected TV audio setting for CABLE/SAT) ≥480i ≥480p ≥720p ≥1080i Even if you select "720p" or "1080i", the video output resolution is restricted to "480p" when images of DVD-Video discs are output from the COMPONENT VIDEO OUT terminals. *1 This function has no effect when S.SURROUND is selected during AUX (TV) playback. *2 In this unit, a P4HD (> 55) video processor is used to provide video of optimal resolution to the connected TV. Advanced operations RQT9508 39