Panasonic CF-18FCAZXVM Notebook Computer - Page 14
Open the display., Connect your computer to a power outlet., Turn your computer on., Setup Windows.
UPC - 092281844367
View all Panasonic CF-18FCAZXVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
First-time Operation Getting Started DC-IN Jack DC IN 16 V Latch B 2 1 Latch A Power Switch Power Indicator 4 Connect your computer to a power outlet. CAUTION Be sure the AC adaptor is connected until completing the first-time use operation. When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer. Handling the AC adaptor Do not twist or pull the AC power cord forcefully. Doing so may damage the connections. Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer. When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed. 5 Open the display. 1 Pull up latch A and release latch B. 2 Lift open the display. 6 Turn your computer on. Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it. CAUTION Do not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly. Do not slide the power switch repeatedly. Once the computer is powered off, you must wait at least ten seconds before powering it on again. 7 Setup Windows. Moving the cursor ( ) or clicking buttons can be performed with the touch pad ( page 21). CAUTION Do not press any keys or touch the touch pad until [Windows XP Professional Setup] is displayed. 1 At [Welcome to the Windows XP Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I don't accept this agreement], then select [Next]. NOTE If [I don't accept this agreement] is selected, the Windows setup will be aborted. 3 Select settings for your region, then select [Next]. 4 Enter your name and organization and then select [Next]. 14