Panasonic CF-M34CGFZKM Reference Guide - Page 50

Dealing With Problems (Advanced) 50 When a problem occurs, please refer to this page. If you still cannot troubleshoot the problem, please contact Panasonic Technical Support. Starting Up The power indicator or battery indicator is not lit Check the cable connection for the AC adapter. Check to see if a fully charged battery is properly installed. Remove the battery pack and disconnect the AC adapter, then connect them again. is displayed Please input your password. If you have forgotten it, contact Panasonic Technical Support. [POST Startup Error(s)] is displayed page 48 Windows startup, or an operation is extremely slow Press F9 in the Setup Utility ( page 37). This will restore the Setup Utility's settings to their default values (except the password settings). Then, the Setup Utility must be run once again for you to input the appropriate operating environment settings. (The processing speed depends on the application software used, so this operation may not cause the processing speed to increase.) The date and time are incorrect You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control Panel]. When the computer is connected to a Local Area Network (LAN), please confirm the date and time of the server. If you continue to experience problems, the internal battery maintaining the clock may need to be replaced. Please contact Panasonic Technical Support. When the previous item is not the cause Press F9 in the Setup Utility ( page 37). This will restore the Setup Utility's settings to their default values (except the password settings). In the MS-DOS mode, run SCANDISK to check the hard disk. At start-up, press F8 to operate the computer in the Safe mode. Try removing all peripheral devices. Shutting Down U n a b l e t o s h u t d o w n If a USB device is connected, try removing it. Windows 95 Battery Indicator The red indicator lights. Repeated beeping sound while the computer is in use. The battery level is low. Save your data and power off your computer. After connecting the AC adapter or replacing the battery pack with a fully charged one, turn your computer on. The red indicator blinks The battery pack or recharging function may be defective. Quickly remove the battery pack and disconnect the AC adapter, then connect them again. If the problem persists, contact Panasonic Technical Support. After the AC adapter is connected, the orange indicator blinks five times Unable to charge because of an improper temperature range. ( tions") "Precau-