Panasonic CF-VDRRT3U Cd/cd-r/rw Drive - Page 26

Troubleshooting Disc cannot be removed. (Disc cover will not open.) Is the drive still operating? While data is being written on the CD-R or CD-RW disc, the disc cover will not open even when the open button is pressed. Wait until the data writing is completed. When [B's CLiP] is used, move the cursor to the icon displayed on the taskbar and right-click to select [Eject]. If the disc cover fails to open even when [Eject] has been selected, operate the emergency open lever ( page 6 E (E)). The drive is not recognized It is not possible to use writing software that does not sup- by writing software other port the drive. than the one provided. How to add data using multiple CD-R/CD-RW drives or multiple kinds of writing software? Use the same drive and same writing software to write data. Otherwise, it may not be possible to either read the data before it is added or read or write the data correcting using the drive or another drive. DVD-R or DVD-RW discs cannot be read. Is the media format or writing system of the DVD disc used the correct one? The DVD-R discs that can be used with this drive must support 4.7 GB (For General/Authoring) and 3.95 GB version 1.1; similarly, the DVD-RW discs that can be used must support 4.7 GB version 1.1/1.2. Furthermore, only discs with data recorded using the Discat-Once system as the writing system can be read. Check the media format and writing system of the discs used. B's Recorder and B's CLiP does not operate properly (When installing Media Player 7 or Media Player 9 under Windows 2000) Uninstall Adaptec CD-Burning Plug-in ( page 15). If Windows Media Player 7 has been installed, update it to Windows Media Player 9 by installing PowerDVD and uninstall the CD Burning Plug-in. If data is written with B's Recorder using USB1.1 port, the "XX transmission speed error, but were circumvented" message appears. This means that transmission failed but that the error was circumvented so no problems are posed. 26