Panasonic CQ-C9801U Auto Radio/cd Deck - Page 12
Mono Monaural, Local, Noise Suppression, Auto Preset, Preset Edit, Radio Audio Filter - manual
UPC - 037988757220
View all Panasonic CQ-C9801U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Radio Direct Memory (D•M: Direct Memory) You can assign your favorite broadcasting station to the [D•M] button. As the result of doing that, your favorite broadcasting station can be received even if the CD mode or the CD changer mode is activated. (Default: FM 87.9 MHz) Note: For the use of an FM transmitter, it is useful for users to register applicable frequencies on D•M (Direct Memory). D•M station calling 1 Press [D•M] (Direct Memory). D•M station writing 1 Select a station you would like to preset. 2 Hold down [D•M] (Direct Memory) for 2 sec. or more. SRC CS Lights when the D•M mode is activated. Station Preset (APM: Auto Preset Memory, P·SET: Preset) Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively. Preset stations can be simply called up by pressing [}] (P·SET) or [{] (P·SET). Notes: ¡ Direct Access can be executed with [1] to [6] buttons on remote control. ¡ You can switch between 6 and 18 for FM presetting stations. (a page 23) ¡ Preset stations are changeable. (a page 23) Auto Preset Memory (APM) Stations with good receiving conditions are automatically preset. 1 Select a band. 2 Hold down [BAND] (APM) for 2 sec. or more. The preset stations under best receiving conditions are received for 5 sec. each after presetting the stations (SCAN). To stop scanning, press [}] or [{]. Note: New stations overwrite existing saved stations. Manual station preset 1 Tune in to a station. 2 Hold down [}] or [{] for 2 sec. or more. 3 Select a preset number by pressing [}] or [{]. 4 Preset the station by holding down [}] or [{] for 2 sec. or more. Frequency/preset number blinks once. Notes: ¡ New stations overwrite existing saved stations. ¡ In step 2, a station can be registered by holding down the numeric button [1] to [6] for 2 sec. or more. ¡ To stop presetting stations, press [DISP] (Display). 22 CQ-C9901U/C9801U/C9701U Mono/Local Setting (Radio Menu Display) (MONO/LOCAL) In the AM mode, only NOISE SUPPRESSION and LOCAL can be selected. 1 Press [MENU] to display the menu display. For using the remote control, hold down [MENU] for 2 sec. or more. 2 Press [}] or [{] to select a mode to be adjusted. 3 Press [BAND] (SET) to adjust. 4 Press [MENU] to confirm the adjustment. For using the remote control, hold down [MENU] for 2 sec. or more. NOISE SUPPRESSION IF filter setting for noise suppression : Wide range : Middle range (default) : Narrow range AUTO PRESET You can select 6 or 18 stations for FM presetting with the use of APM. : Presets 6 stations to FM1 to FM3 respectively, that is, 18 stations in total at the same time. This function is useful for presetting more than 6 stations. (default) : Presets 6 stations with good reception to the selected band from FM1 to FM3. This function is useful for presetting stations in different areas in different bands. PRESET EDIT You can arrange the order of the preset stations. Preset stations can be reordered as you like after executing APM or the like. 1 Press or [[] to select one station to be interchanged. 2 Press [BAND] to confirm your selection. 3 Press or [[] to select the other station to be interchanged. 4 Press [BAND] to confirm your selection. ●Calling an FM station registered on D•M. RADIO AUDIO FILTER MONO (Monaural) Noise reduction when the signal strength decreases : Receiving in stereo (default) : Receiving in mono and reducing the noise level You can select the reception status (band) of FM stations registered on D•M. : OFF (default) : High cut level 1 : High cut level 2 LOCAL Setting when searching for a station : Searching even for a relatively low-intensity radio wave station (default) : Searching only for a high-intensity radio wave station CQ-C9901U/C9801U/C9701U 23 Radio English