Panasonic CQ-C9801U Auto Radio/cd Deck - Page 16

XM Tuner (XM DirectTM receiver) An optional XM DirectTM receiver allows you to receive the XM radio service. Note: A changer and an XM DirectTM receiver are not connectable at the same time. Operation Flow 1 Press [SRC] (Source) to select the XM tuner. 2 Press [BAND] to select a band. SRC CS Preparation: ¡ Connect the optional XM DirectTM receiver (XMD1000). ¡ To connect the XM DirectTM receiver (XMD1000), it is required to use an optional extension cord (XMDPAN100) that is produced by XM exclusively for Panasonic products. Notes: ¡ "RADIO ID" is displayed with channel 0. ¡ "UPDATING" is displayed during the update of the identification code. ¡ "LOADING" is displayed during the acquisition of audio data or information. 3 Select a station. Channel selection []] (TUNE): Preceding channel [[] (TUNE): Next channel Preset station selection [{] (P·SET: Preset): [}] (P·SET: Preset): Lower preset channel Higher preset channel Note: Direct Access can be executed with [1] to [6] buttons on remote control. Preset Number Band Channel number/name Indicates the satellite tuner is ready. XM mode display Artist name/Song title Indicates the intensity of the radio wave. Up to 6 channels can be preset in XM1 to XM3. Preset channels can be simply called up by pressing [}] (P·SET) or [{] (P·SET). Note: Direct Access can be executed with [1] to [6] buttons on remote control. 4 Preset the channel by holding down [}] or [{] for 2 sec. or more. 1 Tune in to a channel. 2 Hold down [}] or [{] for 2 sec. or more. 3 Select a preset number by pressing [}] or [{]. channnel name/preset number blinks once. Notes: ¡ New channels overwrite existing saved stations. ¡ In step 2, a channel can be registered by holding down the numeric button [1] to [6] on the remote control unit for 2 sec. or more. ¡ To stop presetting, press [DISP] (Display). Channel Preset (P·SET: Preset) 30 CQ-C9901U/C9801U/C9701U Functions only by remote control unit TEXT Setting (XM Tuner Menu Display) (TEXT) Selection by Category (P·SET: Preset) You can toggle the category on and off every time you hold down [BAND] for 2 sec. or more. If the category is set to on, the unit operates as follows for each button: Channel selection []] (TUNE): Preceding channel in current category [[] (TUNE): Next channel in current category Category selection [{] (P·SET: Preset): Preceding category [}] (P·SET: Preset): Next category SRC CS Lights when category is activated. 1 Press [MENU] to display the menu display. For using the remote control, hold down [MENU] for 2 sec. or more. 2 Press [}] or [{] to select a mode to be adjusted. TEXT Text display : Enabled (default) : Disabled 3 Press [BAND] (SET) to adjust. 4 Press [MENU] to confirm the adjustment. For using the remote control, hold down [MENU] for 2 sec. or more. Direct Access A channel can be directly selected. Example: channel number 5 1 Press [#] (NUMBER). 2 Press [5]. 3 Press [SET]. Note: To suspend direct selection, press [DISP] (Display). CQ-C9901U/C9801U/C9701U 31 XM Tuner (XM DirectTM receiver) English