Panasonic CQ4500U CQ4300U User Guide - Page 26

Electrical Connections (Only for CQ-4500U) Cautions: This product is designed to operate with a 12-volt negative ground battery system. To prevent damage to the unit, be sure to follow the connection diagram below. Remove the covering of the leads approx. 5 mm long from their end before connecting. Do not insert the power connector into the unit until the wiring is completed. Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and keep cable terminals free from touching any metal parts. Cassette Receiver CQ-4500U Temperature Sensor Lead Sleeper Room Remote Connector (Connect to CA-RC300U) Antenna (Rear Side) ቫ Antenna Connector (R) (Red) To AUX (L) (White) (R) (Red) Preamp-Out (L) (White) AUX-IN PRE-OUT (Rear) ቩ Power Connector CD Changer Control Connector Amp. Cont(MAX 0.1A) (Blue) ACC (Red) Ground (Black) Accessory Power(ACC) (+12V DC, negative ground only) Ground Lead (Connect to a clean, bare metallic part of your vehicle) (White w/black stripe) (Gray w/black stripe) (white) (Gray) Battery (Yellow) Fuse(10A) Battery Lead (Connect to vehicle battery) (Orange w/white AUX-In Sensor stripe) AUX-In Sensor Lead (Connect to vehicle computer) Steering remote (Orange) Steering remote control lead (Violet w/black stripe) (Green w/black stripe) (Green) (Violet) Left Speaker (Front) Right Speaker (Front) Left Speaker (Rear) Right Speaker (Rear) 26