Panasonic CQ4500U CQ4300U User Guide - Page 30
Specifications
View all Panasonic CQ4500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Specifications General Power Supply Maximum Power Output Power Output Tone Action Current Consumption Speaker Impedance Dimensions (W × H × D) Weight AM Radio Frequency Range Useable Sensitivity FM Stereo Radio Frequency Range Useable Sensitivity 50 dB Quienting Sensitivity Frequency Response Alternate Channel Selectivity Stereo Separation Signal/Noise Ratio Weather Band Radio Frequency Range Useable Sensitivity Signal/Noise Ratio (40 dB/µV) Tape Player Reproduction System Tape Speed FF/REW Time Frequency Response Wow and Flutter Signal/Noise Ratio : 12 V DC (11V-16V) Test Voltage 14.4V, Negative ground : 37 W × 4 channels at 400 Hz, Volume Control maximum : 18 W per channel into 4 ohms, 40 to 30,000Hz at 3% THD. : Bass; ± 12 dB at 100 Hz Treble; ± 12 dB at 10 kHz : Less than 2.5 A (tape mode, 0.5 W 4-speaker) : 4 Ω (4-8 Ω acceptable) : 7" × 1-15/16" × 5-7/8" (178 × 50 × 150 mm) : 3 lbs. (1.4 k ) : 530-1,710 kHz : 28 dB/µV (25 µV/ S/N 20 dB) : 87.9-107.9 MHz : 12 dBf. (1.1 µV / 75Ω, S/N 30 dB) : 17 dBf. (1.8 µV / 75Ω) : 30-15,000 Hz ± 3 dB : 75 dB : 35 dB at 1,000 Hz : 70 dB (Mono) : 162.40-162.55 MHz : 3 dB/µV (S/N 20 dB) : 50 dB : 4-track, 2-program stereo : 1-7/8"/sec (4.76 cm/sec) : Less than 110 SEC (C-60) : 35 - 14,000 Hz ± 3 dB : 0.09% (WRMS) : 52 dB (Dolby NR on: 62 dB) *Above specifications comply with EIA standards. Note: Specifications and design are subject to modification without notice due to improvements in technology. Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol A are trademarks of Dolby Laboratories Licensing Corporation. Part 15 of the FCC Rules This unit has been manufactured under the Part 15 of the FCC Rules. Do not attempt to make any changes or modifications to this unit. 30