Panasonic CT27DC50B CT20DC50B User Guide - Page 12
Programming The Remote, With A Code
View all Panasonic CT27DC50B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Programming The Remote REMOTE CONTROL OPERATION The Universal Remote Control can be programmed to operate many manufacturers' components, using the component function buttons for CABLE, DBS, VCR, or DVD. Follow the procedures for programming your Remote Control with or without codes for the component. Determine the manufacturer of the component and look in the table for the code. With A Code • Confirm that the external component is plugged in and on. • Turn the component off. • Press the ACTION and POWER button, together, for at least 5 seconds. • Press appropriate component button on the Remote Control (VCR, DBS/CBL, or DVD). • Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons). • Press the Remote Control POWER button to test the component. If the procedure was successful, the component will turn on. Helpful Hints: Unsuccessful Code If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes.) If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail. Without A Code This procedure searches all codes and is called the "sequence method". • Confirm that the external component is plugged in and on. • Turn the component off. • Press the ACTION and POWER button, together, for at least 5 seconds. • Press appropriate component button on the Remote Control. • Press the button to move forward to the next code. Press the button to move backward. • Press the Remote Control POWER button to test the component. If the procedure was successful, the component will turn on. Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code is found. • After the code is found, press the ACTION button to store the code. Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control. CABLE BOX VCR DBS 11