Panasonic DC-G100 DC-G100 Basic Operating Manual - Page 32
Formatting Cards Initialization
View all Panasonic DC-G100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2. Getting Started • To remove the card, turn the camera off and wait until the LUMIX indicator on the screen goes off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded data.) • The card may be warm just after the camera has been used. Be careful when removing. • Do not perform the following operations during access. The camera may operate incorrectly or the card and recorded images may be damaged. - Turn off the camera. - Remove the battery or card, or disconnect the AC adaptor (optional) or DC coupler (optional). - Subject the camera to vibration, impacts, or static electricity. Formatting Cards (Initialization) Format the cards with the camera before use. • When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card. [ ] Select [Format] • Do not turn off the camera or perform another operation during formatting. • Take care not to turn off the camera while formatting is in progress. • If the card has been formatted with a PC or other device, format it again with the camera. 32 DVQX2040 (ENG)