Panasonic DC-GH5 Basic Owners Manual CA - Page 44

Recording ∫ Adding markers to select and save pictures ([6K/4K Burst(S/S)]) You can add markers if you press [Fn2] during recording. (Up to 40 markers per recording) When selecting and saving pictures from a 6K/4K burst file, you can skip to the positions where you added markers. ∫ Setting Pre-Burst Recording ([6K/4K Burst]/[6K/4K Burst(S/S)]) The camera starts recording approximately 1 second before the shutter button is pressed fully, so you will not miss a photo opportunity. MENU > [Rec] > [6K/4K PHOTO] > [Pre-Burst Recording] > [ON] • Auto Focus operation settings and menus that cannot be set while this function is in use are the same as those during [6K/4K Pre-Burst] operation. ∫ Setting Loop Recording ([6K/4K Burst(S/S)]) With [6K/4K Burst(S/S)], you can perform recording while deleting the oldest recorded data, allowing you to keep on recording while waiting for a photo opportunity without replacing the card. MENU > [Rec] > [6K/4K PHOTO] > [Loop Recording(4K PHOTO)] > [ON] • Once you start recording, the 6K/4K burst file will be recorded and divided approximately every 2 minutes. Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The preceding part will be deleted. • [Loop Recording(4K PHOTO)] is not available for [6K 18M]. Selecting pictures from 6K/4K burst file and saving 1 Select an image with the [ ] or [ ] icon on the playback screen, and press 3. • If the image was recorded with [6K/4K Pre-Burst], proceed to step 3. 2 Drag the slide bar to make a rough selection of scenes. Fn1 Fn2 3 Drag the frames to select the frame you want to save as a picture. • Touch and hold [ ]/[ ] to continuously rewind/forward frame-by-frame. 4 Touch [ ] or [ ] to save the picture. • A confirmation screen will be displayed. • The picture will be saved in JPEG format. 44 DVQX1254 (ENG)