Panasonic DC-S1HBODY DC-S1H Advanced Operating Manual - Page 269
Time Code, Value], Reset], Manual Input], Current Time], Mode], HDMI Time, Code Output], External TC
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
10. Recording Videos [Time Code Value] [Reset] [Manual Input] [Current Time] Sets to 00:00:00:00 (hour: minute: second: frame) Manually input hour, minute, second and frame. Sets hour, minute and second to current time and sets frame to 00. [DF] Drop Frame. The camera modifies the difference between recorded time and time code. 0 Seconds and frames are separated by ".". (Example: 00:00:00.00) [Time Code Mode] [NDF] Non-Drop Frame. Records the time code without drop frame. 0 Seconds and frames are separated by ":". (Example: 00:00:00:00) 0 When the following functions are being used, [Time Code Mode] is fixed to [NDF]: - [50.00Hz (PAL)]/[24.00Hz (CINEMA)] ([Synchro Scan]) - 47.95p or 23.98p [Rec Quality] [HDMI Time Code Output] Time code information is added to images output via HDMI when recording with the [ ] mode. 0 The time code can also be output via HDMI by setting the mode dial to [ ] during playback. In the [Setup] ([IN/OUT]) menu, set [HDMI Mode (Playback)] in [TV Connection] to [AUTO]. (l 451) 0 The device screen may go dark depending on the connected device. 0 Synchronize the time code default value with an external device that supports time code input and output. (l 270) [External TC [TC Selects the input (l 273) and output (l 271) for Setting] Synchronization] time code signals. [TC Output Reference] Sets the timing for time code signal output. (l 271) 269